True/False
Indicate whether the
statement is true or false.
|
|
|
1.
|
Safety glasses must be worn at all times, when using the table saw?
|
|
|
2.
|
Try to use long sleeves, ties, and dangling jewelry when using the table
saw?
|
|
|
3.
|
When ripping stock to greater thicknesses than 1/4” use a push
stick?
|
|
|
4.
|
Carry on conversations when using the table saw?
|
|
|
5.
|
Make sure the blade has come to a complete stop before walking away from the
table saw?
|
|
|
6.
|
Always disconnect the power before changing the blade of the table saw?
|
|
|
7.
|
Make sure the blade is free before turning the table saw on?
|
|
|
8.
|
Position the fence only after the machines is running?
|
|
|
9.
|
The blade height should be adjusted before turning the table saw on?
|
|
|
10.
|
If wood is caught in the table saw, reach over the machines to remove the stock
that is trapped?
|
Multiple Choice
Identify the
choice that best completes the statement or answers the question.
|
|
|
11.
|
The table saw blade should be adjusted how far above the stock?
|
|
|
12.
|
The blade height adjustment wheel is used to?
a. | Raise the height of the blade | c. | Turn the table saw
off | b. | Turn the table saw on | d. | Adjust the angle of the blade |
|
|
|
13.
|
The blade angle adjustment wheel is used to?
a. | Raise the height of the blade | c. | Turn the table saw
off | b. | Turn the table saw on | d. | Adjust the angle of the blade |
|
|
|
14.
|
The on / off switch is used to?
a. | Raise the height of the blade | c. | Adjust the angle of the
blade | b. | Turn the table saw on and off | d. | Make sure that stock is fed parallel to the
blade. |
|
|
|
15.
|
The fence on the table saw is used to?
a. | Adjust the height of the blade | c. | Adjust the angle of the
blade | b. | Turn the table saw on / off | d. | Make sure that stock is fed parallel to the blade |
|
|
|
16.
|
Standing off to the left side of the stock being fed through the table saw is a
good idea because?
a. | Its the cool thing to do | c. | To hold the stock
properly | b. | To avoid kickbacks | d. | To help turn on and off the machine |
|
|
|
17.
|
If a piece of stock is caught in the machine and you feel it is an unsafe
situation, what do you do?
a. | Reach for the piece of stock caught in the machine | c. | Hold the piece of stock being fed
into the table saw, turn the table saw off, and wait for the machine to come to a complete
stop | b. | Make sure the machine is off | d. | Let go of the stock and turn the machines
off |
|